Edison-1 and Edison-1M
Applicable
Materials: All homogeneous materials which allow
transmission of Ultrasonic energy through it like mopst
metals, hard plastics, glass, ceramics etc.
Measuirng Range: 1mm to 300mm (Specified
range depends on test material, transducer, surface and
temperature.)
Probe: Dual crystal (transmitter
Reciever) type.
Key Pad: Sealed tactile
type.
Velocity: 1000m/s to 9999 m/s.
Display: LCD
Type. It displays Thickness, Velocity, Battery check,
Coupling check, and stored readings with
IDs.
Resolution: 0.1mm
Accuracy: +/- 0.1mm (up to
60mm) {with standard +/- 0.5%(above 60mm) probe DT
201}
V-path Correction: Built-in for better
accuracy.
Calibration: One step calibration. (for
steel).
Battery: 2 Penlite Dry Cells (AA) or
NiCd.
Operating time: 18 to 20 hours.(with alkaline
batteries).
Low Battery: Indication by Blinking of
LCD.
Auto Power off: 3 minutes after switching
on/last reading.
Size mm: 125(H) x 65(W) x
30(D).
Weight: 200 Grams (With batteries).
Edison-1M
Memory: 2000 readings with 4
digits ID.
RS-232 Port: Available for connectivity to
PC/Printer.
Unit: Imperial (Inches) or Metric (mm)
selection available
|
